Autel EVO II Battery Charging Hub acquires real-time electric current data and can charge easily up to 4 batteries and up to 2 batteries simultaneously. All while optimizing the charge and redistributing the load for each battery. The Autel EVO II Multi-Battery Charger comes with Parallel charging mode and Sequential Charging mode that offers you choices how you would like to charge the batteries. With smart ring light indicator showing the charging status or identifies errors, charging multiple batteries is easy and smart. Autel Robotics EVO II Battery Multi-Charger is compatible with EVO II Series batteries only.
Charging Up to 4 Batteries easily
EVO 2 Battery Charging Hub acquires real-time electric current data and can charge easily up to 4 batteries and 2 batteries simultaneously.
Parallel Charging Mode & Sequential Charging Mode
EVO II Multi Battery Charger comes with parallel & sequential charging mode.
Charging starts from the lowest battery, when the power level are the same, the batteries are charged simultaneously.
The batteries will be charged in sequence according to their power levels, from high to low.
Ring Light Indicator to Show Charging Status or Errors
1. Solid Blue: All batteries are full charged in parallel-charging mode.
2. Slow Pulsing Blue: Charging in parallel-charging mode.
3. Solid Green: All batteries are fully charged in sequential-charging mode.
4. Slow Pulsing Blue: Charging in sequential-charging mode.
5. Solid Red: Charging error. Check components.
6. Solid Yellow: Firmware updating.
Easy to Use
Step 1: Connect the EVO II Battery Charger to a power outlet
Step 2: Connect the Battery Charger to the Charging Hub
Step 3: Insert the Batteries into the battery port
Step 4: Indicator light becomes slowly pulsing while charging and solid on after fully charged.
Compatible with EVO II Series Batteries
Autel Robotics EVO II Battery Charging Hub is compatible with batteries for EVO II Series only. It can not charge EVO I Batteries.
Operating Voltage: 13.2 V
Operating Temperature: 41~104ºF (5º~45ºC )
Charge Time (4 batteries): 6 hr 30 min
Safe, Fast and Smart Charging Experience
Autel Robotics EVO II Battery Multi-Charger continuously monitors the battery levels and re-distributes load among the batteries for safe and smart charging. Fully charging the 4 batteries takes about 6 hours 30 minutes.